Hot Stain Remover By EaCo Chem
Hot Stain Remover By EaCo Chem
EaCO Chem Hot Stain Remover, Remove Food and Oil Stains From Concrete
A powerful stain lifter for masonry and concrete, Hot Stain Remover is a high pH alkaline cleaning product that will remove both food and petroleum oil staining, and remove heavy carbon deposits and oil from concrete and masonry.
Advantages:
-
Removes both food and petroleum oil staining
-
Removes heavy carbon deposits
-
Ideal for concrete drive-thrus and dumpster pads
Dilutions:
Use Hot Stain Remover undiluted for extremely difficult stains up to 10 part water to 1 part solution less difficult applications.
Application Instructions:
ALWAYS PROTECT THE SURROUNDING AREA BY COVERING WITH PLASTIC.
If you are spraying Hot Stain Remover, try to stay away from or above the mist as it can cause irritation or burns to your skin.
1. Pre-wet the surface (do not saturate) with water before applying Hot Stain Remover.
2. Begin applying Hot Stain Remover to the surface using a low-pressure applicator for a strong dilution and a downstream injector at low pressure for a weaker dilution. A nylon brush may be used to apply when necessary.
3. Dwell times will vary tremendously depending on surface and severity of staining. Testing will determine actual dwell times.
4. Hot Stain Remover has special additives that cause soils to rise to the surface.
Caution: Do not allow the product to dry on a surface.
Coverage Rates:
Coverage rates will vary drastically depending on surface type, porosity, and other variable. The coverage rate will be determined by proper testing.
Rinsing:
Proper rinsing techniques determine the final look and quality of the job. A thorough rinse job is always recommended; however, our chemistry never requires flooding the surface. Hot Stain Remover can be rinsed using cold water and low pressure. Pressures that mark the surface should be avoided. When in doubt, follow the manufacturers recommended P.S.I. for the substrates.
Do not use a zero-degree nozzle.