Pressure Washer Buffer Tank Plumbing Kit 4-10 GPM

Pressure Washer Buffer Tank Plumbing Kit 4-10 GPM

• 8ft of 1” blue crush proof Kuri Tec hose. Used for pressure washer inlet coming from the buffer tank. 
• 3/8” or 1/2” Kuri Tec bypass hose. Used for the recirculating hose running from the unloader back into the top of the buffer tank. PLEASE NOTE: Select the right size bypass hose in the options. 
• Mountable TeeJet strainer filter with a stainless 80 mesh washable filter. You can also add an optional wash out and drain feature to the filter. 
• Banjo 1” straight barbs on each side of the filter
• 1” bulkhead to plumb into the buffer tank to pull water towards the filter. 
• Banjo 1” straight barb and 1” 90 barb. You can use either depending on how you plan on plumbing your hose out of the buffer tank. 
• 1/2” bulkhead used to plumb into the top of the buffer tank to bypass water from the unloader back into the tank when you let off the pressure washer gun. 
• Unique stainless sweeping 90 that works perfectly for the bypass hose going into the bulkhead at the top of the tank. You will get either 3/8 or 1/2 depending on your buffer tank selection. 
• Two #4 and #6 full stainless hose clamps to fit your bypass hose. You get two sizes to work with either 3/8 or 1/2 bypass hose. 
• Four 1” full stainless clamps for the 1” crush proof hose. These are high end clamps imported from the UK

We only use the highest quality parts, fittings, clamps, and hoses. This is the exact kit we use to build our high quality pressure washing skids